APM Automation Solutions Ltd. receives the ATEX number (BVS 08 ATEX E 038 X) for its range of 3DlevelScanner products (S/M/MV)

This enables the non-contact sensors to be installed where potentially explosive atmospheres are kept from the ignition source as per the following Directive 94/9/EC. (1) EC-Type Examination Certificate (2) - Directive 94/9/EC - Equipment and protective systems intended for use in potentially explosive atmospheres (3) BVS 08 ATEX E 038 X (4) Equipment: 3DLevelScanner type S/M/MV (5) Manufacturer: A.P.M. Automation Solutions Ltd. (6) Address: 24 Habarzel Street, 69710 Tel Aviv, Israel (7) The design and construction of this equipment and any acceptable variation thereto are specified in the appendix to this type examination certificate. (8) The certification body of DEKRA EXAM GmbH, notified body no. 0158 in accordance with Article 9 of the Directive 94/9/EC of the European Parliament and the Council of 23 March 1994, certifies that this equipment has been found to comply with the Essential Health and Safety Requirements relating to the design and construction of equipment and protective systems intended for use in potentially explosive atmospheres, given in Annex II to the Directive. (9) The Essential Health and Safety Requirements are assured by compliance with: EN 61241-0 2006 General requirements EN 61241-11 2006 Protection by IS EN 60079-11:2007 Intrinsic safety ´i´. (10) This EC-Type Examination Certificate relates only to the design, examination and tests of the specified equipment in accordance to Directive 94/9/EC. Further requirements of the Directive apply to the manufacturing process and supply of this equipment. These are not covered by this certificate (12) The marking of the equipment shall include the following: II 1/2D Ex ib/iaD IP66 20/21 T95 °C April 14th , 2008
Thank you